Chinese | English
+86 27 67849450
Technical Support


Position: > Technical Support > FAQs
+86-27-67849450 +8613971066778 Room 505, JinFeng Hall A, International Enterprise Center, Optics valley Ave., East Lake high-tech Development Zone, Wuhan, China, 430074
Notices in the use of CS potentiostat/galvanostat
Author: Corrtest Time:2017-05-16 22:36:08 views
1. The middle pin of the 3-pin plug should be well connected to the ground. If the indoor wiring is not standard, say, using the null wire to replace ground wire, then the user must connect the middle pin of    the socket with the nearby steel water tap if possible.

2. The WE clamp cannot be short-circuited with the CE clamp and RE clamp. When the instrument is unused, the user should power off the system or using the dummy cell to properly connect.


Copyright © Wuhan Corrtest Instruments Corp.,Ltd. All Rights Reserved Tel:+86-27-67849450, +8613971066778,Fax:+86-27-67849890-39