Multichannel Potentiostat

CS3108 Multichannel potentiostat (8-channel, EIS*1)

CS3108 is 8-channel potentiostat /galvanostat. One of the channels includes EIS module.

High current/voltage: ±10V, ±1A each channel
Comprehensive techniques: There are comprehensive techniques in each channel incl. EIS
Warranty: 5 years warranty. As the manufacturer, we will provide technical support anytime you need.
Low cost: price includes instrument , software(control & analysis), necessary cables. No other charges. 
Reliability &quality: in the market for 20 years, and now is the No. 1 brand of potentiostat in China
Related Application
Contact Us
Corrtest Instruments
Jinfeng Building A, Intl Enterprise Center, Optics valley Ave.,East lake High-tech Dev. Zone, Wuhan city, 430074, China
Phone/WhatsApp: +86 13469965984
Product Introduction
  8-channel potentiostat/Galvanostat model CS3108 can achieve simultaneous measurements for up to 8 channels.
  The specifications of each channel are identical. Current control range is ±1A, potential control range is ±10V. EIS 10μHz~1MHz is included in one of the channels.
  It supports floating mode, and uses Ethernet connection.
   Each channel is completely independent. so one set  8-channel potentiostat equals to that you have 8 set single-channel potentiostat.
  You choose to use just one or some of the channels. Multichannel potentiostat brings convenience to those who have many samples, and is an ideal device for studies of energy materials, battery study, metal corrosion etc.
High current/voltage: Applied potential range ±10V, current range ±1A. It can meet the needs of most studies.
Comprehensive techniques: Built-in EIS (10μHz~1MHz) is equipped in one channel(CS3108). There are comprehensive techniques in each channel.
Warranty: 5 years warranty. We're the manufacturer, and our engineers will provide technical support anytime you need.
Low cost: The price includes instrument host, software(experiment control & data processing), necessary cables, dummy cell. No other charges. 
Reliability &quality: We've been in the market for 20 years, and now is the No. 1 brand of potentiostat product in China

-  Reaction mechanism of Electrosynthesis, electrodeposition (electroplating), anodic oxidation.
-  Electrochemical analysis, electro-catalysis, sensor; 
-  New energy materials, advanced functional materials, photoelectronic materials;
-  Corrosion study of metals in water, concrete and soil etc;
-  Fast evaluation of corrosion inhibitor, water stabilizer, coating and cathodic protection efficiency.

Simultaneous Measurements
The customer can choose a same electrochemical technique in every channel. For example, among 8 channels, you can choose to run 4 channels to all do EIS measurement. Set the parameters just one time, then EIS measurement in each channel will be conducted at the same time.

In each channel, you can also conduct different experiments.
As is shown in the below picture, EIS, galvanostatic charge and discharge, CV, and polarization curve tests are conducted at the same time.


Number of channels: 8 Channel insulation resistance: >100MΩ
Communication: Ethernet Lower-pass filter: covering 8-decade
Potential control range: ±10V Constant current control range: ±1A
Potential accuracy: 0.1%×full range±1mV Current accuracy: 0.1%×full range
Potential resolution:
10μV(>100Hz), 3μV(<10Hz)
Current resolution: 1pA
Potential rise time: 1μs(<10mA),<10μs(<2A) Current range: 2nA ~1A
Reference electrode input impedance: 1012Ω||20pF Maximum current output: ±1A
Compliance: ±12V Current increment during scan: 1mA @1A/ms
CV and LSV scan rate: 0.001mV~10000V/s Potential increment during scan: 0.076mV@1V/ms
CA and CC pulse width: 0.0001~65000s DPV and NPV pulse width: 0.0001~1000s
SWV frequency:0.001~100KHz CV minimum potential increment: 0.075mV
AD data acquisition:16bit@1MHz,20bit @1kHz IMP frequency:10μHz~1MHz
DA resolution:16bit, setup time:1μs Current and potential range: automatic
Operating System requirements: 
Windows 7/win8/win10
Weight: 18 Kg      
Electrochemical Impedance Spectroscopy(EIS)
Signal generator
Frequency range:10μHz~1MHz AC signal amplitude: 1mV~2500mV
Frequency accuracy:0.005% Signal resolution: 0.1mV RMS
DDS output impedance: 50Ω DC Bias: -10V~+10V
Wave distortion: <1% Waveform: sine wave, triangular wave, square wave
Scan mode: Logarithmic/linear, increase/decrease
Signal analyzer
Maximum integral time:106 cycles or 105s Measurement delay:0105S
Minimum integral time:10ms or the longest time of a cycle
DC offset compensation
Potential compensation range: -10V~+10V Current compensation range: -1A~+1A
Bandwidth adjustment: automatic and manual, 8-decade frequency range
Techniques – CS3108
One channel includes all the techniques incl. EIS.
Other channels includes all but EIS.
Stable polarization
  • Open Circuit Potential (OCP)
  • Potentiostatic (I-T curve)
  • Galvanostatic
  • Potentiodynamic (Tafel plot)
  • Galvanodynamic (DGP)
Transient Polarization
  • Multi Potential Steps
  • Multi Current Steps
  • Potential Stair-Step (VSTEP)
  • Galvanic Stair-Step (ISTEP)
Chrono Method
  • Chronopotentiometry (CP)
  • Chronoamperametry (CA)
  • Chronocaulometry (CC)
  • Linear Sweep Voltammetry (LSV)
  • Cylic Voltammetry (CV)
  • Staircase Voltammetry (SCV)
  • Square Wave Voltammetry (SWV)
  • Differential Pulse Voltammetry (DPV)
  • Normal Pulse Voltammetry (NPV)#
  • Differential Normal Pulse Voltammetry (DNPV)
  • AC Voltammetry (ACV)
  • 2nd harmonic AC Voltammetry (SHACV)
  • Fourier Transform AC Voltammetry (FTACV)
Stripping Voltammetry
  • Potentiostatic Stripping
  • Linear Stripping
  • Staircase Stripping
  • Square Wave Stripping
  • Differential Pulse Voltammetry Stripping
  • Normal Pulse Voltammetry Stripping
  • Differential Normal Pulse Voltammetry Stripping
  • Differential Pulse Amperometry (DPA)
  • Double Differential Pulse Amperometry (DDPA)
  • Triple Pulse Amperometry (TPA)
  • Integrated Pulse Amperometric Detection (IPAD)
 Electrochemical Impedance Spectroscopy (EIS)
  • EIS vs Frequency (IMP)
  • EIS vs Time (IMPT)
  • EIS vs Potential (IMPE)(Mott-Schottky)
Corrosion Measurements
  • Cyclic polarization curve (CPP)
  • Linear polarization curve (LPR)
  • Electrochemical Potentiokinetic Reactivation (EPR)
  • Electrochemical Noise (EN)
  • Zero resistance Ammeter (ZRA)
Battery test
  • Battery Charge and Discharge
  • Galvanostatic Charge and Discharge (GCD)
  • Potentiostatic Charging and Discharging(PCD)
  • Potentiostatic Intermittent Titration Technique (PITT)
  • Galvanostatic Intermittent Titration Technique (GITT)
  • Electrochemical Stripping/ Deposition
  • Bulk Eletrolysis with Coulometry (BE)
  • Rs Measurement

Home  About Us  Potentiostat/Galvanostat  Accessories  Support  Contact Us  

Copyright By © 2008-2021 Wuhan Corrtest Instrument Corp., Ltd